Tritiated water (HTO), a ubiquitous byproduct of the nuclear industry, is a radioactive contaminant of major concern for environmental authorities. Although understanding spatiotemporal heterogeneity of airborne HTO vapor holds great importance for radiological safety as well as diagnosing a reactor's status, comprehensive HTO distribution dynamics inside nuclear facilities has not been studied routinely yet due to a lack of appropriate monitoring techniques. For current systems, it is difficult to simultaneously achieve high representativeness, sensitivity, and spatial resolution. Here, we developed a passive monitoring scheme, including a newly designed passive sampler and a tailored analytical protocol for the first comprehensive 3D distribution characterization of HTO inside a nuclear reactor facility. The technique enables linear sampling in any environment at a one-day resolution and simultaneous preparation of hundreds of samples within 1 day. Validation experiments confirmed the method's good metrological properties and sensitivity to the HTO's spatial dynamics. The air in TU Wien's reactor hall exhibits a range of 3H concentrations from 75-946 mBq m-3 in the entire 3D matrix. The HTO release rate estimated by the mass-balance model (3199 ± 306 Bq h-1) matches the theoretical calculation (2947 ± 254 Bq h-1), suggesting evaporation as the dominant HTO source in the hall. The proposed method provides reliable and quality-controlled 3D monitoring at low cost, which can be adopted not only for HTO and may also inspire monitoring schemes of other indoor pollutants.
Keywords: 3D spatial distribution; environmental radioactivity; indoor air pollution; nuclear industry; passive sampler; tritium.