Fiber-based supercapacitors (FSCs) exhibit desirable application potential and development prospects in wearable energy storage devices because of their flexibility and wearability. However, the low capacity in the unit volume and insufficient fiber strength hinder their further development in practical application. Herein, the MnO2 nanomaterials with regulatable crystalline structure were synthesized by one-step hydrothermal strategy. The formation of the MnO2 crystalline structure involved the "crimp-phase transition" process. Among them, the 2 × 2 tunnel type α-MnO2 nanowires exhibited excellent electrochemical capacitance (43.8 F g-1), high rate performance (61%, 0.25 to 6 A g-1), and remarkable cyclic stability (99%), which can be attributed to their good symmetry in space and high shared vertices proportion. On this basis, the α-MnO2 nanowires were coblended with GO to construct MnO2/rGO hybrid fibers by scalable continuous wet spinning and in situ acid reduction. Noteworthily, in MnO2/rGO hybrid fibers, the doping amount of MnO2 nanowires as high as 50 wt % could be achieved, while the strength reached 11.73 MPa, which can be ascribed to the superior surface morphology of MnO2 nanowires and the unique cement wall structure of hybrid fibers. Finally, the obtained hybrid fiber electrodes were assembled into symmetrical FSCs. Notably, the FSCs delivered remarkable volume specific capacitance (129.5 F cm-3) and impressive energy density (18 mWh cm-3) at 1.75 A cm-3. In addition, the assembled all-solid-state FSCs indicated excellent deformability and application potential. This work offers some insight for promoting the continuous preparation of fiber electrodes, the development of FSCs, and practical application in wearable energy textile.
Keywords: MnO2 nanowires; fiber-based supercapacitors; graphene fibers; hybrid fiber electrodes; wearable energy textile.