A large volume of polymeric waste is generated in cities, and some of this reaches the sea and beaches. This waste stays for hundreds of years, damaging marine environments and organisms. To minimize the effects of pollution, collection and recycling allow a return to the production chain. This research aims to produce and evaluate a polymeric mixture obtained via processing plastic waste collected on the beaches of the city of Ilhéus-Bahia. Subsequently, the mixture is converted into a granulated form for application as fine aggregate in the production of cementitious matrices. A polymer blend of polystyrene, polypropylene, and high- and low-density polyethylene was obtained and evaluated by thermal, morphological, and mechanical tests in three processing stages. The degradation temperatures were close for the three processing stages and the level of processing influenced the mechanical strength. As for elastic modulus and deformation, there was no significant difference in using the mixture processed once or twice. The results showed that the reuse of the waste is applicable, the mixture presented a compact, reasonably homogeneous material with different morphology. Therefore, this work finds importance in the possibility of promoting waste recycling and adding value to a material that would become waste, thus showing its potential for application in the construction industry as an addition to cementitious mixtures and leading to savings in inputs.
Keywords: marine pollution; morphology; polymers; properties; recycling.