The application of organic coatings is a common way of protecting metal substrates against corrosion. To dry the coating faster, catalytic infrared radiation (IR) can be applied. This paper aims to assess the differences in the physical, chemical, and corrosion properties of primer coatings dried with catalytic infrared radiation, compared to the same coatings dried under atmospheric conditions. Corrosion properties were characterized using humidity and a salt spray chamber, as well as electrochemical impedance spectroscopy (EIS), preceded by open circuit potential (OCP) measurement. Pencil hardness, cross-cut, and pull-off adhesion tests were used to compare the properties of examined primers before and after testing in the corrosion acceleration chambers. The microstructure and distribution of chemical composition were studied by scanning electron microscope (SEM) with energy-dispersive X-ray spectroscopy (EDX) together with Fourier-transform infrared spectroscopy (FTIR). Phase transitions in the coating were determined by differential scanning calorimeter (DSC). Infrared-dried primers achieved a higher curing degree. Therefore, their mechanical and corrosion properties are superior when compared to the same coatings dried under atmospheric conditions.
Keywords: corrosion protection; curing degree; epoxy coating; infrared drying; primers.