Preparation of PANI modified TiO2 and characterization under pre- and post- photocatalytic conditions

Abstract

Polyaniline (PANI) is a promising conducting polymer for surface modification of TiO₂ to overcome limitations of the use of visible light and attain increased photocatalytic efficiency for the removal of organic contaminants. In this study, a series of polyaniline modified TiO₂ (PANI-TiO₂) composites were prepared by using "in-situ" chemical oxidation polymerization method. The composites were systematically characterized by Fourier transform infrared spectroscopy (equipped with an attenuated total reflection accessory, FTIR-ATR), Raman spectroscopy, X-ray diffractometry (XRD), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDAX), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS), photoluminescence spectroscopy (PL), nitrogen (N₂) physisorption (Brunauer - Emmett - Teller surface area (S_BET) and Barrett-Joyner-Halenda (BJH) pore size analysis), thermogravimetry-derivative thermogravimetry (TG-DTG) techniques. XRD patterns of PANI-TiO₂ composites confirmed both the amorphous phase of PANI and the crystalline character of TiO₂. TG/DTG analysis complemented the XRD profiles that the interactions between PANI and TiO₂ resulted in a more stable PANI-TiO₂ matrix. SEM images displayed the dominant morphology as dandelion-like shapes of PANI being more pronounced with increasing PANI ratios in PANI-TiO₂ composites. UV-DRS profiles revealed that the band gap energies of the composites were lower than bare TiO₂ expressing a shift to the visible light region. Both PL and UV-DRS analyses confirmed the band-gap reduction phenomenon of PANI modification of TiO₂. The incorporation of PANI into TiO₂ resulted in a reduction of the surface area of TiO₂. The composites were subsequently subjected to photocatalytic activity assessment tests using humic acid (HA) as a model of refractory organic matter (RfOM) under simulated solar irradiation (Uyguner-Demirel et al. Environ Sci Pollut Res 30 85626-85638, 2023). The morphological and structural changes attained upon application of photocatalysis were also evaluated by FTIR-ATR, Raman spectroscopy, XRD, and SEM-EDAX methods in a comparable manner. The FTIR-ATR spectral features of PANI, RfOM and all composites displayed peaks with slight shifts under pre- and post- photocatalytic conditions as well as following dark surface interactions. Besides exhibiting noticeable photocatalytic performance, PANI-TiO₂ composites were also proven to maintain stability under non-selective oxidation conditions in the presence of a complex organic matrix. The prepared PANI-TiO₂ composites overcoming the limitations of UVA light active bare TiO₂ photocatalysis could possibly find a beneficial use as potential catalysts in solar photocatalytic applications.

Keywords: PANI-TiO2 composites; Photocatalysis; Refractory organic matter; Surface modification.