Light-responsive shape memory polymers are attractive as they can be activated through remote and spatially-controlled light. In this work, 4D printing of poly(lactic acid) (PLA) composites with a near-infrared light-responsive was achieved by using the simple melt blending method and adding 3 wt% of lignin. Lignin with a conjugated structure was used as the photothermal conversion module. The composites exhibited significant photothermal effects under near-infrared (808 nm) laser irradiation, and the laser irradiation was also effective in initiating and controlling the shape memory. The structure of lignin can be improved by the action of dicumyl peroxide (DCP) to enhance the interfacial adhesion between polyamide elastomer (PAE) and polylactic acid (PLA), reduce the size of dispersed phases, and serve as an effective rheological modifier to exhibit the ideal melt viscosity required for 3D printing of composites. The good mechanical, thermal stability, and rheological properties provide assurance for the 4D printing of composites. This research provides an environmentally friendly and practical method for creating composites that have the potential to serve as ideal actuator components in a range of applications.
Keywords: 3D printing; Lignin; Shape memory.
Copyright © 2023 Elsevier B.V. All rights reserved.