Preparation of Yb-Sb co-doped Ti/SnO2 electrode for electrocatalytic degradation of sulfamethoxazole (SMX)

Abstract

To efficiently break down residual sulfonamide antibiotics in environmental water, Yb-Sb co-doped Ti/SnO₂ electrodes were fabricated using a solvothermal method. The effect of different amounts of Yb doping on the properties of the electrodes was studied. When the atom ratio of Sn: Yb is 100 : 7.5 in the preparation, the as-obtained coral-like electrodes (denoted as Yb 7.5%) possessed the smallest diameter of spherical particles on the surfaces, to result in the denser surface, highest electrocatalytic activity and smallest resistance of the electrode. As anode for electrocatalytic degradation of sulfamethoxazole, the Yb 7.5% electrode showed a degradation rate of 92% in 90 min, which was much higher than that of Yb 0% electrode (62.7% degradation rate). The electrocatalytic degradation of sulfamethoxazole was investigated with varying current densities and initial concentrations. Results indicated that the degradation process followed pseudo-first-order kinetics, and the degradation rate constants for Yb 7.5% and Yb 0% electrodes were 0.0278 min^-1 and 0.0114 min^-1, respectively. Furthermore, the service life of Ti/SnO₂ electrodes was significantly improved after Yb doping, as demonstrated by accelerated life testing. Yb 7.5% exhibited a service life that was 2.7 times longer than that of Yb 0%. This work offers a new approach to construct Yb-Sb co-doped Ti/SnO₂ electrodes with excellent electrooxidation activity and high stability for the electrochemical oxidation degradation of sulfamethoxazole.

Keywords: Electrocatalytic degradation; Electrode preparation; Solvothermal method; Sulfamethoxazole; Yb–Sb co-doping.