Lamb wave based damage imaging under nonlinear chirp excitation

Abstract

Considering a trade-off between temporal-spatial resolution and multi-mode nature of Lamb waves, tone bursts with short durations are usually used as excitations in Lamb wave based damage detection. A short-duration excitation usually requires a large amplitude to carry sufficient energy so as to obtain response signals with enough signal-to-noise ratio and cover a large inspection area. In this paper, an alternative Lamb wave damage imaging method using nonlinear chirp (nonlinear frequency modulation, NLFM) excitation with a long duration and a small amplitude is proposed. The signal processing techniques of pulse compression and dispersion compensation are adopted to compress the long-duration wave packets of response signals into short ones. Compared with conventional tone burst excitations with short durations and small amplitudes, due to the long duration of the nonlinear chirp excitation and the use of pulse compression, sufficient energy can be applied to transducers under small amplitude excitations so the image contrast in imaging will not degrade. Furthermore, as large amplitude excitations are no longer required, high voltage amplifiers are not necessary so the hardware of the Lamb wave testing system is simplified. Experiments on a carbon steel plate with an artificial crack are carried out and Lamb wave signals are collected using a linear array consisting of nine PZTs. Experimental results under the NLFM signal and conventional tone bursts are provided. Experimental results show that under the condition of the same excitation amplitude, the proposed method under the NLFM excitation can achieve better imaging quality compared with methods under conventional tone bursts.

Keywords: Damage imaging; Lamb wave; Nonlinear chirp; Pulse compression; Structural health monitoring.