Cross-Scale Seepage Characteristics of Fractured Horizontal Wells in Tight Gas Reservoirs

ACS Omega. 2023 Jun 26;8(27):24291-24301. doi: 10.1021/acsomega.3c01342. eCollection 2023 Jul 11.

Abstract

Tight gas reservoirs are rich in microscale pores and fractures. The effect of microscale gas seepage in tight sandstone matrix on gas well productivity cannot be ignored. At present, the effect of microscale gas flow on the well testing model of fractured horizontal wells has not been systematically studied. In this paper, first, the coupling influence mechanism of "multicomponent gas effect-fracture geometry characteristics" is expounded, second, a seepage model coupling the flow in the fracture and the flow in the gas reservoir is established on the fracture wall surface, and third, an unsteady pressure analysis model for fractured horizontal wells in tight gas reservoirs is established. Results show that (a) when the microscale fracture is at a quite small level, the Knudsen diffusion plays a dominant role at a wide range of pressures; (b) the mass transfer rate of multicomponent shale gas through macrofractures increases with increasing CO2 fraction; (c) the unsteady flow process is divided into six stages in turn: microscale diffusion stage, linear flow stage in fractures, linear flow stage between fractures, early radial flow stage in gas reservoirs, linear flow stage in gas reservoirs, and late radial flow stage in gas reservoirs; and (d) with an increase of dimensionless bottom-hole storage coefficient, the second and third stages of flow are gradually covered up.