Response surface optimization of chemical coagulation for solid-liquid separation of dairy manure slurry through Box-Behnken design with desirability function

Thenuwara Arachchige Omila Kasun Meetiyagoda; Toshinori Takahashi; Takeshi Fujino

doi:10.1016/j.heliyon.2023.e17632

Response surface optimization of chemical coagulation for solid-liquid separation of dairy manure slurry through Box-Behnken design with desirability function

Heliyon. 2023 Jun 24;9(7):e17632. doi: 10.1016/j.heliyon.2023.e17632. eCollection 2023 Jul.

Authors

Thenuwara Arachchige Omila Kasun Meetiyagoda¹, Toshinori Takahashi¹, Takeshi Fujino^{1

2}

Affiliations

¹ Department of Environmental Science and Technology, Graduate School of Science and Engineering, Saitama University, 255 Shimo-okubo, Sakura-ku, Saitama, 338-8570, Japan.
² Strategic Research Area for Sustainable Development in East Asia, Saitama University, 255 Shimo-okubo, Sakura-ku, Saitama, 338-8570, Japan.

Abstract

Discharging livestock manure slurry without proper treatment causes various environmental and sociological problems. Chemical coagulation is a widely used and easily applicable method for treating such wastewater. However, the technique requires optimization to enhance coagulation efficiency while minimizing chemical usage. In this study, we propose an efficient, low-cost, and environmentally safe chemical coagulation method for solid-liquid separation of dairy manure slurry. Experiments were conducted in laboratory jar tests using dairy manure slurry to investigate the impact of coagulants, specifically polyaluminum chloride (PAC) and cationic polyacrylamide (CPAM), as well as pH, on the process of solid-liquid separation. Preliminary ranges of PAC, CPAM, and pH were estimated through single-factor experiments. Coagulation optimization and modeling were performed using the response surface methodology (RSM) with the Box-Behnken design (BBD), wherein the desired goal of each parameter was set to maximize solid-liquid separation efficiency while reducing chemical dosage to maintain residual aluminum (Al) concentrations below water quality standards. Numerical optimization predicted that the optimal dosages were 75 mg/L of PAC and 35 mg/L of CPAM at pH 7. Under these conditions, removal efficiencies of 99% for turbidity and 97% for chemical oxygen demand (COD) were achieved, with a minimal residual Al concentration of 0.045 mg/L. Positive zeta potential values in the treated water confirmed complete separation of negatively charged solids in the dairy manure slurry. The response values predicted by BBD aligned with the experimental results, and the analysis of variance (ANOVA) demonstrated the predictability and accuracy of the response models. Consequently, this study highlights the practical application of RSM with BBD in optimizing chemical coagulation using PAC and CPAM to achieve efficient solid-liquid separation in livestock wastewater while maintaining low residual Al concentrations.

Keywords: Box–Behnken design; Cationic polyacrylamide; Chemical coagulation; Dairy manure slurry; Polyaluminum chloride; Solid–liquid separation; Surface response methodology.