Magnetic fluid shock absorbers (MFSAs) have been successfully utilized to eliminate microvibrations of flexible spacecraft structures. The method of enhancing the damping efficiency of MFSAs has always been a critical issue. To address this, we drew inspiration from the tree frog's toe pads, which exhibit strong friction due to their unique surface structure. Using 3D printing, we integrated bionic textures copied from tree frog's toe pad surfaces onto MFSAs, which is the first time to combine bionic design and MFSAs. Additionally, this is also the first time that surface textures have been applied to MFSAs. However, we also had to consider practical engineering applications and manufacturing convenience, so we modified the shape of bionic textures. To do so, we used an edge extraction algorithm for image processing and obtained recognition results. After thorough consideration, we chose hexagon as the shape of surface textures instead of bionic textures. For theoretical analysis, a magnetic field-flow field coupling dynamic model for MFSAs was built for the first time to simulate the magnetic fluid (MF) flow in one oscillation cycle. Using this model, the flow rate contours of the MF were obtained. It was observed that textures cause vortexes to form in the MF layer, which produced an additional velocity field. This increased the shear rate, ultimately leading to an increase in flow resistance. Finally, we conducted vibration reduction experiments and estimated damping characteristics of the proposed MFSAs to prove the effectiveness of both bionic texture and hexagon surface textures. Fortunately, we concluded that hexagon surface textures not only improve the damping efficiency of MFSAs but also require less MF mass.
Keywords: bionic surface texture; magnetic fluid; tree frog; vibration; vortex.