A new adsorbent based on an immobilized waste-derived LTA zeolite in agarose (AG) has proven to be an innovative and efficient alternative for removing metallic contaminants from water impacted by acid mine drainage (AMD) because the immobilization prevents the solubilization of the zeolite in acidic media and eases its separation from the adsorbed solution. A pilot device was developed containing slices of the sorbent material [AG (1.5%)-LTA (8%)] to be used in a treatment system under an upward continuous flow. High removals of Fe2+ (93.45%), Mn2+ (91.62%), and Al3+ (96.56%) were achieved, thus transforming river water heavily contaminated by metallic ions into water suitable for non-potable use for these parameters, according to Brazilian and/or FAO standards. Breakthrough curves were constructed and the corresponding maximum adsorption capacities (mg/g) (Fe2+, 17.42; Mn2+, 1.38; Al3+, 15.20) calculated from them. Thomas mathematical model was well fitted to the experimental data, indicating the participation of an ion-exchange mechanism in the removal of the metallic ions. The pilot-scale process studied, in addition to being highly efficient in removing metal ions at toxic levels in AMD-impacted water, is linked to the sustainability and circular economy concepts, due to the use as an adsorbent of a synthetic zeolite derived from a hazardous aluminum waste.
Keywords: agarose gel; immobilization; industrial waste; mine-impacted water; remediation; zeolitic material.