Objective: Advancements in computed tomography (CT) reconstruction have enabled image quality improvements and dose reductions. Previous advancements have included iterative and model-based reconstruction. The latest image reconstruction advancement uses deep learning, which has been evaluated for polychromatic imaging only. This article characterizes a commercially available deep learning imaging reconstruction applied to dual-energy CT.
Methods: Monochromatic, iodine basis, and water basis images were reconstructed with filtered back projection (FBP), iterative (ASiR-V), and deep learning (DLIR) methods in a phantom experiment. Slice thickness, contrast-to-noise ratio, modulation transfer function, and noise power spectrum metrics were used to characterize ASiR-V and DLIR relative to FBP over a range of dose levels, phantom sizes, and iodine concentrations.
Results: Slice thicknesses for ASiR-V and DLIR demonstrated no statistically significant difference relative to FBP for all measurement conditions. Contrast-to-noise ratio performance for DLIR-high and ASiR-V 40% at 2 mg I/mL on 40-keV images were 162% and 30% higher than FBP, respectively. Task-based modulation transfer function measurements demonstrated no clinically significant change between FBP and ASiR-V and DLIR on monochromatic or iodine basis images.
Conclusions: Deep learning image reconstruction enabled better image quality at lower monochromatic energies and on iodine basis images where image contrast is maximized relative to polychromatic or high-energy monochromatic images. Deep learning image reconstruction did not demonstrate thicker slices, decreased spatial resolution, or poor noise texture (ie, "plastic") relative to FBP.
Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.