Background: Intraventricular neuroendoscopic surgery for tumor resection, biopsy, or cyst fenestration frequently requires precise placement of an intraventricular or intracystic catheter. Placement under direct visualization is not feasible because of small bore of working channel of the standard small ventriculoscope. Various techniques have been reported using a separate transcortical trajectory, endoluminal endoscope, or endovascular guide wire.
Objective: To describe a technique allowing precise placement of intraventricular/intracystic catheter using a small bore working ventriculoscope, without need for additional equipment.
Methods: Description of the technique including intraoperative photographs, video, and illustrative cases are provided.
Results: The peel-away sheath is peeled off approximately 1 to 2 cm to allow for the shaft of the endoscope to pass past its tip. Ventricular access is gained using the peel-away sheath. After the stylet is removed, the peel-away sheath is not peeled further or stapled to the skin. The endoscope is introduced into the ventricle through the peel-away sheath. After the required intraventricular work is performed, the endoscope is maneuvered into the location of the desired catheter position. The peel-away sheath is slowly advanced over the stationary endoscope past its tip. While the peel-away sheath is being held in place, the endoscope is removed. After the catheter has been introduced into the peel-away sheath to a premeasured depth, the peel-away sheath is peeled and removed. The catheter is then connected to collection system, reservoir or shunt system.
Conclusion: The current technique allows for the precise placement of intraventricular/intracystic catheters without the need for additional equipment or a separate transcortical trajectory.
Copyright © Congress of Neurological Surgeons 2023. All rights reserved.