Iron (Fe)/iron oxide-modified biochar has practicable adsorption capability for phosphorus (P), but it is expensive. In this study, we synthesized novel low-cost and eco-friendly adsorbents co-pyrolyzed biochars using Fe-rich red mud (RM) and peanut shell (PS) wastes via a one-step pyrolysis process for removing P from pickling wastewater. The preparation conditions (heating rate, pyrolysis temperature, and feedstock ratio) and P adsorption behaviors were systematically investigated. In addition, a series of characterization and approximate site energy distribution (ASED) analyses were conducted to understand the P adsorption mechanisms. The magnetic biochar (BR7P3) with m (RM):m (PS) of 7:3 prepared at 900°C and 10 °C/min had a high surface area (164.43 m2/g) and different abundant ions (including Fe3+, and Al3+). In addition, BR7P3 exhibited the best P removal capability (142.6 mg/g). The Fe2O3 from RM was successfully reduced to Fe0, which was easily oxidized as Fe3+ to precipitate with H2PO4-. The electrostatic effect, Fe-O-P bonding, and surface precipitation were the main mechanisms of P removal. ASED analyses revealed that high distribution frequency and solution temperature led to a high P adsorption rate of the adsorbent. Therefore, this study provides new insight into the waste-to-wealth strategy by transforming PS and RM into mineral-biomass biochar with excellent P adsorption capability and environmental adaptability.
Keywords: Adsorption; Approximate site energy distribution; Co-pyrolyzed biochar; Phosphorous removal; Red mud.
Copyright © 2023. Published by Elsevier Ltd.