A hole array was fabricated via photolithography to wet the bottoms of holes using oxygen plasma. Amide-terminated silane, a water immiscible compound before hydrolysis, was evaporated for deposition on the plasma-treated hole template surface. The silane compound was hydrolyzed along the edges of circular sides of the hole bottom to form a ring of an initiator after halogenation. Poly(methacrylic acid) (PMAA) was grafted from the ring of the initiator to attract Ag clusters (AgCs) as AgC-PMAA hybrid ring (SPHR) arrays via alternate phase transition cycles. The SPHR arrays were modified with a Yersinia pestis antibody (abY) to detect the antigen of Yersinia pestis (agY) for plague diagnosis. The binding of the agY onto the abY-anchored SPHR array resulted in a geometrical change from a ring to a two-humped structure. The reflectance spectra could be used to analyze the AgC attachment and the agY binding onto the abY-anchored SPHR array. The linear range between the wavelength shift and agY concentration from 30 to 270 pg mL-1 was established to obtain the detection limit of ~12.3 pg mL-1. Our proposed method provides a novel pathway to efficiently fabricate a ring array with a scale of less than 100 nm, which demonstrates excellent performance in preclinical trials.
Keywords: plague; poly(methacrylic acid) brush; reflectance spectra; silver clusters.