Heart rate monitoring is especially important for aging individuals because it is associated with longevity and cardiovascular risk. Typically, this vital parameter can be measured using wearable sensors, which are widely available commercially. However, wearable sensors have some disadvantages in terms of acceptability, especially when used by elderly people. Thus, contactless solutions have increasingly attracted the scientific community in recent years. Camera-based photoplethysmography (also known as remote photoplethysmography) is an emerging method of contactless heart rate monitoring that uses a camera and a processing unit on the hardware side, and appropriate image processing methodologies on the software side. This paper describes the design and implementation of a novel pipeline for heart rate estimation using a commercial and low-cost camera as the input device. The pipeline's performance was tested and compared on a desktop PC, a laptop, and three different ARM-based embedded platforms (Raspberry Pi 4, Odroid N2+, and Jetson Nano). The results showed that the designed and implemented pipeline achieved an average accuracy of about 96.7% for heart rate estimation, with very low variance (between 1.5% and 2.5%) across processing platforms, user distances from the camera, and frame resolutions. Furthermore, benchmark analysis showed that the Odroid N2+ platform was the most convenient in terms of CPU load, RAM usage, and average execution time of the algorithmic pipeline.
Keywords: ARM-based embedded platforms; benchmark analysis; contactless monitoring; heart rate; remote PPG.