Here, 2% Cu + 2% Ni co-doped ZnO nanoparticles were synthesized using the hydrothermal method and were used as particle reinforcements of Cu-Ni nanocomposite coatings prepared by electroplating technology. The effects of the added (Cu, Ni) co-doped ZnO nanoparticles (2-8 g/L) on the phase structure, surface morphology, thickness, microhardness, corrosion resistance, and photocatalytic properties of the coatings were investigated. The nanocomposite coatings have obvious diffraction peaks on the crystal planes of (111), (200), and (220), showing a wurtzite structure. The surface of the nanocomposite coatings is cauliflower-like, and becomes smoother and denser with the increase in the addition of nanoparticles. The grain size, thickness, microhardness, corrosion resistance, and photocatalytic properties of the nanocomposite coating reach a peak value when the added (Cu, Ni) co-doped ZnO nanoparticles are 6 g/L. At this concentration, the mean crystallite size of the coating reaches a minimum of 15.31 nm, and the deposition efficiency of the coating is the highest. The (Cu, Ni) co-doped ZnO nanoparticle reinforcement makes the microhardness reach up to 658 HV. The addition of nanoparticles significantly improves the corrosion resistance and photocatalytic properties of nanocomposite coatings. The minimum corrosion current density is 2.36 × 10-6 A/cm2, the maximum corrosion potential is -0.301 V, and the highest decolorization rate of Rhodamine B is 28.73% after UV irradiation for 5 h.
Keywords: (Cu, Ni) co-doped ZnO; Cu-Ni nanocomposite coating; corrosion resistance; microhardness; photocatalytic properties.