Cigarette butts generated are one of the major sources of total solid waste production and lead to environmental issues. This article has the objective of evaluating the effects of cellulose acetate microfibers (CAFs) sourced from discarded cigarette filters (CFs) as fiber reinforcement on the physico-mechanical properties and thermal conductivity of cementitious materials. To do so, mortar samples were prepared using different incorporated quantities of fibers (0.5, 1, 1.5, 2, 2.5, and 5% compared to the quantity of sand added to the mixture) and subjected to different tests to characterize the influence of CAFs on the microstructure of elaborated materials, considering the changes in workability time, compressive strength, flexural strength, density, water absorption, and microstructural analysis. Furthermore, the life cycle assessment (LCA) of mortar mixes in terms of CO2 emissions is made. The results revealed that the increasing percentages of CAFs reduced the dry density and compressive strength, by approximately 1.62-51% and 37-69.64%, respectively, and a notable enhancement of insulation characteristics by about 5-47.5% was achieved. Microstructure analysis confirmed the experimental investigation and revealed that adding more than 1% of fibers resulted in a significantly low unit weight with greater entrapped air content. The studies prove the possibility of recycling cigarette butts for insulating cementitious matrix. In addition, applying mortar containing acetate cellulose fibers is recognized as a more environmentally friendly mixture in terms of reducing CO2 emissions and could participate significantly in the achievement of SDGs.
Keywords: CO2 emissions; Cellulose acetate; Cement mortar; Cigarette butts; Life cycle assessment; SDGs.
© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.