Regional differences in bone mineral density biomechanically induce a higher risk of adjacent vertebral fracture after percutaneous vertebroplasty: a case-comparative study

Abstract

Background: Adjacent vertebral fracture (AVF) is a frequently observed complication after percutaneous vertebroplasty (PVP) in patients with osteoporotic vertebral compressive fracture. Biomechanical deterioration initially induces a higher risk of AVF. Studies demonstrated that the aggravation of regional differences in the elastic modulus of different components might deteriorate the local biomechanical environment and increase the risk of structural failure. Considering the existence of intravertebral regional differences in bone mineral density (BMD) (i.e. elastic modulus), it was hypothesized in the present study that higher intravertebral BMD differences may induce a higher risk of AVF biomechanically.

Materials and methods: The radiographic and demographic data of osteoporotic vertebral compressive fracture patients treated using PVP were reviewed in the present study. The patients were divided into two groups: those with AVF and those without AVF. The Hounsfield unit (HU) values of transverse planes from the superior to the inferior bony endplate were measured, and the differences between the highest and lowest HU values of these planes were considered the regional differences of the HU value. The data from patients with and without AVF were compared, and the independent risk factors were identified through regression analysis. PVP with different grades of regional differences in the elastic modulus of the adjacent vertebral body was simulated using a previously constructed and validated lumbar finite element model, and the biomechanical indicators related to AVF were computed and recorded in surgical models.

Results: Clinical data on 103 patients were collected in this study (with an average follow-up period of 24.1 months). The radiographic review revealed that AVF patients present a significantly higher regional difference in the HU value and that the increase in the regional difference of the HU value was an independent risk factor for AVF. In addition, numerical mechanical simulations recorded a stress concentration tendency (the higher maximum equivalent stress value) in the adjacent vertebral cancellous bone, with a stepwise aggravation of the adjacent cancellous bony regional stiffness differences.

Conclusions: The aggravation of regional BMD differences induces a higher risk of AVF after PVP surgery through a deterioration of the local biomechanical environment. The maximum differences in the HU value of the adjacent cancellous bone should, therefore, be measured routinely to better predict the risk of AVF. Patients with noticeable regional BMD differences should be considered at high risk for AVF, and greater attention must be paid to these patients to reduce the risk of AVF.

Evidence grade: Level III b.