The paper presents new reactive materials, namely marl and travertine, and their thermal modifications and the Polonite® material, analyzing their phosphorus removal from water and wastewater by sorption. Based on the experimental data, an analysis of the factors influencing the sorption capacity of the materials, such as the material dose, pH of the initial solution, process temperature, surface structure, and morphology, was performed. Adsorption isotherms and maximum sorption capacities were determined with the use of the Langmuir, Freundlich, Langmuir-Freundlich, Tóth, Radke-Praunitz, and Marczewski-Jaroniec models. The kinetics of the phosphorus sorption process of the tested materials were described using reversible and irreversible pseudo-first order, pseudo-second order, and mixed models. The natural materials were the most sensitive to changes in the process conditions, such as temperature and pH. The thermal treatment process stabilizes the marl and travertine towards materials with a more homogeneous surface in terms of energy and structure. The fitted models of the adsorption isotherms and kinetic models allowed for an indication of a possible phosphorus-binding mechanism, as well as the maximum amount of this element that can be retained on the materials' surface under given conditions-raw marl (43.89 mg P/g), raw travertine (140.48 mg P/g), heated marl (80.44 mg P/g), heated travertine (282.34 mg P/g), and Polonite® (54.33 mg P/g).
Keywords: adsorption; ecotechnology; green chemistry; phosphorus; phosphorus sorption; reactive materials; wastewater treatment.