In this work, monolithic three-dimensional complementary metal oxide semiconductor (CMOS) inverter array has been fabricated, based on large-scale n-MoS2 and p-MoTe2 grown by the chemical vapor deposition method. In the CMOS device, the n- and p-channel field-effect transistors (FETs) stack vertically and share the same gate electrode. High k HfO2 is used as the gate dielectric. An Al2 O3 seed layer is used to protect the MoS2 from heavily n-doping in the later-on atomic layer deposition process. P-MoTe2 FET is intentionally designed as the upper layer. Because p-doping of MoTe2 results from oxygen and water in the air, this design can guarantee a higher hole density of MoTe2 . An HfO2 capping layer is employed to further balance the transfer curves of n- and p-channel FETs and improve the performance of the inverter. The typical gain and power consumption of the CMOS devices are about 4.2 and 0.11 nW, respectively, at VDD of 1 V. The statistical results show that the CMOS array is with high device yield (60%) and an average voltage gain value of about 3.6 at VDD of 1 V. This work demonstrates the advantage of two-dimensional semi-conductive transition metal dichalcogenides in fabricating high-density integrated circuits.
Keywords: 3D integration; complementary metal oxide semiconductor (CMOS) inverter; n-MoS 2 and p-MoTe 2; power consumption; voltage gain.
© 2023 Wiley-VCH GmbH.