Miniaturized spectrometers have attracted much attention due to their capability to detect spectral information within a small size. However, such technology still faces challenges including large-scale preparation and performance repeatability. In this work, we overcome these challenges by demonstrating a microspectrometer constructed with a series of pixelized graded-bandgap perovskite photodetectors fabricated with inkjet printing. High-quality perovskite films with minimal pinholes and large grains are deposited by optimizing printing conditions including substrate temperature and surface modification. The resulting perovskite photodetectors show decent photosensing performance, and the different photodetectors based on perovskite films with different bandgaps exhibit various spectral responsivities with different cutoff wavelength edges. Microspectrometers are then constructed with the array of the pixelized graded-bandgap perovskite photodetectors, and incident spectra are algorithmically reconstructed by combining their output currents. The reconstruction performance of the miniaturized spectrometer is evaluated by comparing the results to the spectral curve measured with a commercial bulky spectrometer, indicating a reliable spectral reconstruction with a resolution of around 10 nm. More significantly, the miniaturized spectrometers are successfully fabricated on polymer substrates, and they demonstrate excellent mechanical flexibility. Therefore, this work provides a flexible miniaturized spectrometer with large-scale fabricability, which is promising for emerging applications including wearable devices, hyperspectral imaging, and internet of things.
Keywords: flexible miniaturized spectrometer; graded bandgap; perovskite; printing; spectrum reconstruction.