Sodium-ion batteries (SIBs) are expected to be ideal alternatives to lithium-ion batteries (LIBs) in the future due to their abundant and low-cost resource advantages. A key challenge in SIBs is the development of anodes capable of insertion/extraction of sodium ions (Na+) with large radii. Here, hollow bowl-shaped porous carbon materials are uniformly modified with vertically grown graphene (denoted as HBC/VGSs) demonstrating a large specific surface area and three-dimensional structure, which are employed as a viable high-performance anode for SIBs. HBC/VGSs anodes are highly effective at storing sodium because of their structural features. As a result, the HBC/VGSs electrodes provide a high reversible capacity of 409 mAh g-1 after 100 cycles at 0.1 A g-1, as well as outstanding rate capability (301.6 mAh g-1 at 5 A g-1). Moreover, it also shows extraordinary cycling stability (230.3 mAh g-1 after 2500 cycles at a high current density of 5 A g-1) that is significantly better than the pristine hollow bowl-shaped porous carbon (HBC). Cyclic Voltammetry (CV) and Galvanostatic Intermittent Titration Technique (GITT) were used to analyze the pseudocapacitance and sodium storage kinetics. It was found that high electrical conductivity and large surface area can improve Na+ adsorption and diffusion, enhance the electronic conductivity, and deliver superior capacity and rate. The results, taken as a whole, provide new insight into the creation of long-lasting carbon anodes that deliver optimal performance in SIBs.
Keywords: Anode material; Carbon; Graphene; Sodium storage; Sodium-ion battery.
Copyright © 2023 Elsevier Inc. All rights reserved.