Simulation Analysis of a Wavefront Reconstruction of a Large Aperture Laser Beam

Sensors (Basel). 2023 Jan 5;23(2):623. doi: 10.3390/s23020623.

Abstract

In order to solve the problem of atmospheric influence on the far-field measurement of the quality of a laser beam, we proposed a direct wavefront measurement system based on the Hartmann detection principle, which can measure large apertures and high-power laser beams. The measuring system was composed of a lens array and a detector. The wavefront detection of a large aperture laser beam could be realized by controlling the distance between the lenses and the size of the lens. The influence of different duty cycle factors on the accuracy of the wavefront reconstruction under the same arrangement and different arrangement conditions was simulated and analyzed. The simulation results showed that when the sub-lenses of the system were not in close contact, the reconstruction accuracy of the duty factor of 0.8 was close to that of the case of the duty factor of 1. Within a certain detection range, the hexagonal arrangement of 19 lenses and the arrangement of 8 × 8 lens arrays had a high wavefront restoration accuracy; both were lower than 0.10 λ. The system proposed in this paper was suitable for measuring a large aperture laser beam, providing a new idea for measuring and analyzing the quality of large aperture laser beams. It also has an important significance for improving the measurement accuracy of the beam quality.

Keywords: Zernike polynomial; beam quality; imaging systems; large aperture measurement; lens array; wavefront reconstruction.

MeSH terms

  • Computer Simulation
  • Equipment Design
  • Lasers
  • Lenses*
  • Light

Grants and funding

This research was funded by the National Natural Science Foundation of China (Grant No. 41875033).