To promote the popularization and development of hydrogen energy, a micro-simulation approach was developed to determine the Mie-Grüneisen EOS of 316 stainless steel for a hydrogen storage tank in the Hugoniot state. Based on the combination of the multi-scale shock technique (MSST) and molecular dynamics (MD) simulations, a series of shock waves at the velocity of 6-11 km/s were applied to the single-crystal (SC) and polycrystalline (PC) 316 stainless steel model, and the Hugoniot data were obtained. The accuracy of the EAM potential for Fe-Ni-Cr was verified. Furthermore, Hugoniot curve, cold curve, Grüneisen coefficient (γ), and the Mie-Grüneisen EOS were discussed. In the internal pressure energy-specific volume (P-E-V) three-dimensional surfaces, the Mie-Grüneisen EOSs show concave characteristics. The maximum error of the calculation results of SC and PC is about 10%. The results for the calculation deviations of each physical quantity of the SC and PC 316 stainless steel indicate that the grain effect of 316 stainless steel is weak under intense dynamic loads, and the impact of the grains in the cold state increases with the increase in the volume compression ratio.
Keywords: MSST; Mie–Grüneisen equation of state; SC and PC 316 stainless steel; intense shock loads; molecular dynamics.