The incorporation of drug-loaded mesoporous materials in dosage forms prepared with fused deposition modeling (FDM) has shown the potential to solve challenges relating to additive manufacturing techniques, such as the stability of poorly-soluble drugs in the amorphous state. However, the addition of these non-melting mesoporous materials significantly affects the mechanical properties of the filament used in FDM, which in turn affects the printability of the feedstock material. Therefore, in this study a full-factorial experimental design was utilized to investigate different processing parameters of the hot melt extrusion process, their effect on various mechanical properties and the potential correlation with the filaments' printability. The thermolabile, poorly-soluble drug ibuprofen was utilized as a model drug to assess the potential of two mesoporous materials, Mesoporous Magnesium Carbonate (MMC) and a silica-based material (MCM-41), to thermally protect the loaded drug. Factorial and principal components analysis displayed a correlation between non-printable MCM-41 filaments and their mechanical properties where printable filaments had a maximum stress >7.5 MPa and a Young's modulus >83 MPa. For MMC samples there was no clear correlation, which was in large part attributed to the filaments' inconsistencies and imperfections. Finally, both mesoporous materials displayed a thermal protective feature, as the decomposition due to the thermal degradation of a significant portion of the thermolabile drug was shifted to higher temperatures post-loading. This highlights the potential capability of such a system to be implemented for thermosensitive drugs in FDM applications.
Keywords: Experimental design; FDM; Hot-melt extrusion; Mesoporous material; Poorly-soluble drug; Thermal protection.
© 2022 The Authors.