Leaching Characteristics of Potentially Toxic Metals from Tailings at Lujiang Alum Mine, China

Int J Environ Res Public Health. 2022 Dec 19;19(24):17063. doi: 10.3390/ijerph192417063.

Abstract

To investigate the leaching characteristics and potential environmental effects of potentially toxic metals (PTMs) from alum mine tailings in Lujiang, Anhui Province, soaking tests and simulated rainfall leaching experiments were conducted for two types of slag. PTMs comprising Cd, Cr, Cu, Mn, and Ni were detected in the slag. Cu and Cd contents exceeded the national soil risk screening values (GB 15618-2018). pH values of the two slag soaking solutions were negatively correlated with the solid:liquid ratio. pH values of the sintered slag soaking solutions with different solid:liquid ratios finally stabilized between 4.4 and 4.59, and those of the waste slag soaking solutions finally stabilized between 2.7 and 3.4. The concentrations of Cd, Cr, Cu, Mn, and Ni leached from waste slag were higher than those from sintered slag, and the dissolved concentrations of these PTMs in sintered slag were higher under rainfall leaching conditions than soaking conditions (the difference in Cr concentration was the smallest, 5.6%). The cumulative release of Cd, Cr, Cu, Mn, and Ni increased as the leaching liquid volume increased. The kinetic characteristics of the cumulative release of the five PTMs were best fitted by a double constant equation (R2 > 0.98 for all fits). Single factor index evaluations showed that Mn and Ni were the PTMs with high pollution degrees (Pi for Mn and Ni exceed 1) in the leaching solutions. However, considering the biotoxicity of PTMs, the water quality index evaluations showed that the water quality of the sintered slag soaking solution, the waste slag soaking solution, and the sintered slag leachate was good, poor, and undrinkable, respectively. The health risk assessment showed that the total non-carcinogenic risk (HI) values in adults for both the sintered slag leachate and waste slag soaking solution exceeded the safe level of 1, with HI values of 3.965 and 2.342, respectively. The hazard quotient (HQ) for Cd was 1.994 for the sintered slag leachate, and Cd and Cr make up 50.29% and 15.93% of the total risk, respectively. Cr makes up 28.38% of the total risk for the waste slag soaking solution. These results indicate a high non-carcinogenic risk of exposure to Cd and Cr in the leaching solution used for drinking purposes. These findings may provide a reference for the evaluation and ecological control of PTM pollution in alum mining areas.

Keywords: alum mine tailings; kinetic fitting; potentially toxic metals; rainfall leaching; soaking test.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Cadmium
  • China
  • Environmental Monitoring / methods
  • Metals, Heavy* / analysis
  • Risk Assessment
  • Soil / chemistry
  • Soil Pollutants* / analysis

Substances

  • Metals, Heavy
  • aluminum sulfate
  • Cadmium
  • Soil Pollutants
  • Soil

Grants and funding

This research was funded by the National Natural Science Foundation of China (41977007, 52222903), Science and Technology Program of Shaanxi Province (2017JM5107), and Research Project of State Key Laboratory of Eco-hydraulics in Northwest Arid Region of China (QJNY-2019-01).