In the petroleum industry, the remaining oil is often extracted using conventional chemical enhanced oil recovery (EOR) techniques, such as polymer flooding. Nanoparticles have also greatly aided EOR, with benefits like wettability alteration and improvements in fluid properties that lead to better oil mobility. However, silica nanoparticles combined with polymers like hydrolyzed polyacrylamide (HPAM) improve polymer flooding performance with better mobility control. The oil displacement and the interaction between the rock and polymer solution are both influenced by this hybrid approach. In this study, we investigated the effectiveness of the injection of nanofluid-polymer as an EOR approach. It has been observed that nanoparticles can change rock wettability, increase polymer viscosity, and decrease polymer retention in carbonate rock. The optimum concentrations for hydrolyzed polyacrylamide (2000 ppm) and 0.1 wt% (1000 ppm) silica nanoparticles were determined through rheology experiments and contact angle measurements. The results of the contact angle measurements revealed that 0.1 wt% silica nanofluid alters the contact angle by 45.6°. The nano-silica/polymer solution resulted in a higher viscosity than the pure polymer solution as measured by rheology experiments. A series of flooding experiments were conducted on oil-wet carbonate core samples in tertiary recovery mode. The maximum incremental oil recovery of 26.88% was obtained by injecting silica nanofluid followed by a nanofluid-assisted polymer solution as an EOR technique. The application of this research will provide new opportunities for hybrid EOR techniques in maximizing oil production from depleted high-temperature and high-salinity carbonate reservoirs.
Keywords: EOR; nanoparticles; oil recovery; polymer; polymer retention; polymer viscosity; wettability alteration.