Compared with wood, bamboo has a special fiber gradient structure. Bamboo fibers have attracted attention as reinforced polymer composites. This study investigated the effects of lamination and fiber volume on the physical and mechanical properties of bamboo laminated composites (BLCs). Six types of BLC were derived by parallel and cross laminating bamboo veneers with high, middle, and low fiber volumes. The results indicated that the laminated structure and fiber volume significantly influenced the BLC properties. Microstructural analysis showed that parallel lamination and low fiber volume were more conducive to resin penetration and enhanced the bonding strength. Both the bending and tensile strengths of the cross lamination were lower than those of the parallel lamination. BLCs made of veneers with high and middle fiber volumes and parallel lamination had the maximum bending and tensile strengths (145.1 and 101.53 MPa, respectively). When tested for water resistance, parallel and cross lamination inhibited expansion in the thickness (TSR, 0.56-2.14%) and width (WSR, 0.07-1.61%) directions, respectively. Laminated structures and veneers with varying fiber volume contents should be chosen according to the specific application scenarios. This study provides a reference for selecting an appropriate BLC structure and fiber volume based on application.
Keywords: bamboo laminated composite; fiber volume; laminated structure; mechanical properties; water resistance.