Detection of Hydrogen Sulfide in Sewer Using an Erbium-Doped Fiber Amplified Diode Laser and a Gold-Plated Photoacoustic Cell

Molecules. 2022 Oct 1;27(19):6505. doi: 10.3390/molecules27196505.

Abstract

A photoacoustic detection module based on a gold-plated photoacoustic cell was reported in this manuscript to measure hydrogen sulfide (H2S) gas in sewers. A 1582 nm distributed feedback (DFB) diode laser was employed as the excitation light source of the photoacoustic sensor. Operating pressure within the photoacoustic cell and laser modulation depth were optimized at room temperature, and the long-term stability of the photoacoustic sensor system was analyzed by an Allan-Werle deviation analysis. Experimental results showed that under atmospheric pressure and room temperature conditions, the photoacoustic detection module exhibits a sensitivity of 11.39 μV/ppm of H2S and can reach a minimum detection limit (1σ) of 140 ppb of H2S with an integration time of 1 s. The sensor was tested for in-field measurements by sampling gas in the sewer near the Shanxi University canteen: levels of H2S of 81.5 ppm were measured, below the 100 ppm limit reported by the Chinese sewer bidding document.

Keywords: erbium-doped fiber amplifier; gold-plated photoacoustic cell; hydrogen sulfide; sewer gas detection.

MeSH terms

  • Erbium
  • Gold
  • Humans
  • Hydrogen Sulfide* / analysis
  • Lasers, Semiconductor
  • Spectrum Analysis / methods

Substances

  • Gold
  • Erbium
  • Hydrogen Sulfide