Lead-Free Copper-Based Perovskite Nanonets for Deep Ultraviolet Photodetectors with High Stability and Better Performance

Nanomaterials (Basel). 2022 Sep 20;12(19):3264. doi: 10.3390/nano12193264.

Abstract

Considering practical application and commercialization, the research of non-toxic and stable halide perovskite and its application in the field of photoelectric detection have received great attention. However, there are relatively few studies on deep ultraviolet photodetectors, and the perovskite films prepared by traditional spin-coating method have disadvantages such as uneven grain size and irregular agglomeration, which limit their device performance. Herein, uniform and ordered Cs3Cu2I5 nanonet arrays are fabricated based on monolayer colloidal crystal (MCC) templates prepared with 1 μm polystyrene (PS) spheres, which enhance light-harvesting ability. Furthermore, the performance of the lateral photodetector (PD) is significantly enhanced when using Cs3Cu2I5 nanonet compared to the pure Cs3Cu2I5 film. Under deep ultraviolet light, the Cs3Cu2I5 nanonet PD exhibits a high light responsivity of 1.66 AW-1 and a high detection up to 2.48 × 1012 Jones. Meanwhile, the unencapsulated PD has almost no response to light above 330 nm and shows remarkable stability. The above results prove that Cs3Cu2I5 nanonet can be a great potential light-absorbing layer for solar-blind deep ultraviolet PD, which can be used as light absorption layer of UV solar cell.

Keywords: Cs3Cu2I5; nanonet; photoelectric detection; ultraviolet.