Condensation, which can be observed in nature as a phase change heat transfer phenomenon, is a critical phenomenon in industrial fields such as power generation, water desalination, and environmental control. Many existing studies have applied surfaces with different wettability by controlling the surface topology to enhance condensation heat transfer. However, the industrial applicability is close to zero due to the limited size and shape of surfaces and low supersaturation conditions. Here, we regulate the surface topology of large-area copper tubes, which are representative industrial metals. We fabricated four copper tubes with different surface structures. We analyzed the condensation phenomenon of the modified tube under specific supersaturation conditions by measuring the overall heat transfer coefficient. We analyzed the condensation phenomenon by measuring the condensation heat transfer coefficient. We have recognized that there is a difference between the maximum droplet radius and the droplet detaching frequency depending on the size and shape of the structure. We measured the contact angle and contact angle hysteresis to accurately analyze the droplet behavior on each surface. As a result, we show that there is a correlation between contact angle hysteresis (CAH) and the total heat transfer coefficient, indicating heat transfer performance. These findings can be applied when evaluating surfaces with excellent condensation heat transfer performance for use in real industrial environments, which can dramatically reduce time and cost.
© 2022 The Authors. Published by American Chemical Society.