The search for renewable resources that can replace petroleum products is not only nerve-wracking, but also perplexing, as there is an abundance of plants that have yet to be explored. In this project, virgin castor oil was converted to polyol in two steps: epoxidation and hydroxylation. The resulting polyol was used to synthesize two series of water-borne polyurethane dispersions (WPUDs). The effects of the diisocyanates on the final product were evaluated. Isophorone diisocyanate (IPDI) and dicyclohexylmethane-4,4'-diisocyanate (H12MDI) were used as the hard segment (HS) up to 72 wt%, along with 1-4 butanediol (BD) as the chain extender, for the dispersions. Fourier transform infrared spectroscopy (FTIR) confirmed the bonds required for the synthesis of the dispersions. Thermogravimetric analysis (TGA) showed the multistep degradation for both series: maximum degradation took place at 500 °C for IPDI and 600 °C for H12MDI-based series. Scanning electron microscopy (SEM) showed phase-segmented morphology. Hemolytic activity was observed at biologically safe levels of up to 7.5% for H12MDI-based series. Inhibition of biofilm formation showed comparable results against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus): up to 46%. The results were also confirmed by phase contrast microscopy.
Keywords: H12MDI; IPDI; SEM; biocompatibility; biological assay; castor oil.