A hyphenated pressurized hot water—aqueous two-phase extraction (PHW-ATPE) method was applied to extract solasodine from Solanum mauritianum (S. mauritianum). A central composite design (CCD) was applied to determine the optimal conditions for the extraction of solasodine. The parameters evaluated included the percentage concentration of salt (NaCl or Na2CO3) and temperature. The fit of the central composite design response surface model for PHW-ATPE to the data generated a model with a good quadratic fit (R2 = 0.901). The statistically significant (p < 0.05) parameters, such as the linear and quadratic effects of the concentration of salt (%) powder, had a significant impact on the extraction of solasodine. The application of multiply charged salts such as Na2CO3 (kosmotrope) was shown to be a comparably better extractant of solasodine than NaCl (chaotrope) due to the salting-out effect. The optimized conditions for extraction of solasodine with NaCl or Na2CO3 were a temperature of 80 °C at a salt concentration of 20%. The maximum extraction of solasodine was 300.79 mg kg−1 and 162.34 mg kg−1 for Na2CO3 and NaCl, respectively.
Keywords: PHW-ATPE; S. mauritianum; response surface methodology; solasodine.