Chipless radio frequency identification (RFID) technology has been widely used in the field of structural health monitoring (SHM), but most of the current research mainly focuses on the detection of mechanical properties and there are few studies on the multi-physical parameters (for example, temperature and humidity) in the climatic environment around the structure. Thus, it is necessary to design a small and compact sensor for multi-parameter detection. This paper proposes a multi-parameter chipless RFID sensor based on microstrip coupling, which supports 4-bit ID code and integrates two detection functions of temperature and humidity. Through linear normalization fitting, the sensitivity of the sensor is about 2.18 MHz/RH in the ambient relative humidity test and the sensitivity of the sensor is about 898.63 KHz/°C in the experimental test of water bath heating from 24.6 °C to 75 °C. In addition, this paper proposes an engineering application detection method, designs a lightweight dynamic spectrum detection and wireless transmission platform based on a lightweight vector network analyzer (VNA) and realizes the real-time extraction and transmission of RFID spectrum sensing data. The means are more flexible and economical than traditional experimental scenarios.
Keywords: chipless radio frequency identification; multi-parameter sensor; structural health monitoring; temperature and humidity sensing; wireless detection system.