Biodegradable polymeric materials have become the most attractive research interest in recent years and are gradually widely used in various fields in the case of environmental pollution. In this paper, binary blends, mainly including varying contents of polyglycolic acid (PGA) and poly(vinyl alcohol) (PVA), were prepared via a melt compounding strategy. The ethylene-methyl acrylate-glycidyl methacrylate (EMA-GMA) was employed as the compatibilizer to improve the compatibility between the PGA and PVA and the polyolefin elastomer (POE) was used as toughening agent. The anti-compression property and water-soluble ability of the blends were particularly studied to explore their potential application in an oil/gas exploitation field. Special attentions were paid to the evolution of the water-soluble ability of PGAX with the PVA concentration. Furthermore, isothermal shear measurement and thermogravimetric analysis were performed to evaluate the thermal stability of PGA and PGA blends (PGAX) during melt processing. The results showed that the incompatibility between PGA and PVA largely deteriorated the mechanical property, i.e., anti-compression strength, leading to fragile characteristics under a lower compressive load for the PGAX samples with varied contents of PVA. The presence of PVA and EMA-GMA greatly enhanced the viscoelasticity of the PGA melt, showing an increased storage modulus and viscosity at a low shear frequency; however, the thermal instability of PGAX was intensified owing to the greater ease of thermal degradation of PVA than that of PGA. Meanwhile, the water-soluble ability of PGAX was improved due to the high water dissolution of PVA, which played the role as a sacrificial material. The purpose of this work is to pursue an effective modification for PGA processing and application via melt blending.
Keywords: mechanical property; polyglycolic acid; thermal stability; water-soluble ability.