From computed tomography to finite element space: A unified bone material mapping strategy

Clin Biomech (Bristol, Avon). 2022 Jul:97:105704. doi: 10.1016/j.clinbiomech.2022.105704. Epub 2022 Jun 15.

Abstract

Background: The spatially varying mechanical properties in finite element models of bone are most often derived from bone density data obtained via quantitative computed tomography. The key step is to accurately and efficiently map the density given in voxels to the finite element mesh.

Methods: The density projection is first formulated in least-squares terms and then discretized using a continuous and discontinuous variant of the finite element method. Both discretization variants are compared with the nodal and element approaches known from the literature.

Findings: In terms of accuracy in the L2 norm, energy distance and efficiency, the discontinuous zero-order variant appears to be the most advantageous. The proposed variant sufficiently preserves the spectrum of density at the edges, while keeping computational cost low.

Interpretation: The continuous finite element method is analogous to the nodal formulation in the literature, while the discontinuous finite element method is analogous to the element formulation. The two variants differ in terms of implementation, computational cost and ability to preserve the density spectrum. These differences cannot be described and measured by known indirect methods from the literature.

Keywords: Biomechanics; Bone fracture; Bone stiffness; Computational modeling.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Bone Density
  • Bone and Bones* / diagnostic imaging
  • Finite Element Analysis
  • Humans
  • Tomography, X-Ray Computed* / methods