This research estimates the efficiency of domestic wastewater treatment in the removal of organic pollutants and nitrogen compounds with a two-stage treatment sequence (an activated sludge reactor in the first stage, and a trickling filter in the second stage), and with the application of floating carriers in the activated sludge reactor. The materials "Polyvom", "Polystyrene" and "Bioballs" were adopted as floating carriers with previously determined filling ratios in the reactor volume of 10%, 20% and 20%, respectively. After the first stage of the study, it was found that the most effective treatment was achieved using the "Polyvom" material. Therefore, only this floating carrier was considered in the second and third stages of the study. Within the stages of the research, lab-scale benches operated under different operation modes of the treatment sequence. At the end of the study, it was possible to achieve the following levels of purification: BOD5 (2.1 mg/L), NH4 (0.4 mg/L), NO2 (1.0 mg/L), and NO3 (25 mg/L). The mean values of the concentrations of BOD, NH4, and NO3 met the requirements, but the concentration of NO2 exceeded the requirements (1.0 mg/L vs. 0.08 mg/L). These results were achieved under a hydraulic retention time in the activated sludge reactor of 8 h, and the MLSS for the free-floating and immobilized activated sludge was 0.2 and 0.9 g/L, respectively.
Keywords: BOD; biofilm carrier; filling ratio; floating carrier; nutrient removal; wastewater treatment.