Ray-based blind deconvolution (RBD) is a method that estimates the source waveform and channel impulse response (CIR) using the ray arrival in an underwater environment. The RBD estimates the phase of the source waveform by using beamforming. However, low sampling, array shape deformation, and other factors can cause phase errors in the beamforming results. In this paper, phase correction is applied to the beamforming estimated source phase to improve RBD performance. The impulsiveness of the CIR was used as additional information to correct the initially estimated source phase. Kurtosis was used to measure impulsiveness, and the phase correction that maximized the kurtosis of the CIRs was calculated through optimization. The proposed approach is called ray-based blind deconvolution with maximum kurtosis phase correction (RBD-MKPC) and is based on a single-input multiple-output system. The RBD-MKPC was tested with several CIRs and source waveform combinations in the shallow-water acoustic variability experiment 2015 using broadband high-frequency pulses (11-31 kHz) as the source and a sparse vertical 16-element line array as receivers. The results indicate that the RBD-MKPC improves the estimation performance. In addition, from an optimization point of view and compared with other initialization methods, the proposed method showed superior convergence speed and estimation performance.