To improve the output performance of the piezoelectric energy harvester, this paper proposed the design of a linear-arc composite beam piezoelectric energy harvester (PEH-C). First the nonlinear restoring force model of a composite beam was obtained by the numerical simulation method. Afterwards, the corresponding coupled governing equations were derived by using the generalized Hamilton principle, laying the foundation for subsequent in-depth research. After this, a finite element simulation was performed in the COMSOL software to simulate the output voltage, stress distribution, and resonance frequency of the PEH-C under different curvatures. In this way, the effect of curvature change on the PEH-C was analyzed. Finally, the PEH-C with a curvature of 40 m−1 was prepared, and an experimental platform was built to verify the correctness of the relevant analysis. The results showed that the resonant frequency of the PEH-C can be changed by changing the curvature, and that the stress on the composite beam will increase after the arc segment is introduced. When the curvature of the PEH-C was 40 m−1, the open-circuit output voltage was 44.3% higher than that of the straight beam.
Keywords: curvature; dynamic modeling; energy harvester; finite element method; linear-arc beam.