There are no standards for testing the properties of 3D-printed materials; hence, the need to develop guidelines for implementing this type of experiment is necessary. The work concerns the development of a research methodology for interlayer bond strength evaluation in 3D-printed mineral materials. In additive manufactured construction elements, the bond strength is a significant factor as it determines the load-bearing capacity of the entire structural element. After we completed a literature review, the following three test methods were selected for consideration: direct tensile, splitting, and shear tests. The paper compares the testing procedure, results, and sample failure modes. The splitting test was found to be the most effective for assessing layer adhesion, by giving the lowest scatter of results while being an easy test to carry out.
Keywords: 3D printing; additive manufacturing; building materials; interlayer bond strength.