Phthalates are synthetic chemicals widely used, mainly as plasticizers, which are ubiquitous and recognized as endocrine-disrupting chemicals. For investigation of phthalate residues leached from PET bottles into drinking water, a simple and sensitive method was developed, validated and applied to a series of real samples. Solid-phase microextraction (SPME) was used in direct immersion mode for concentration of phthalate traces from 10 mL of each water sample. Four commercially available SPME fibers were tested and compared, while six dialkyl phthalates were investigated: dimethyl phthalate (DMP), diethyl phthalate (DEP), diisopropyl phthalate (DiPP), diisobutyl phthalate (DiBP), di-n-butyl phthalate (DnBP) and di-ethylhexyl phthalate (DEHP). The extracted phthalic acid esters were separated and quantified by gas chromatography hyphenated with tandem mass spectrometry (GC-MS/MS) and a detection method based on multiple reaction monitoring (MRM) mode was fully developed, optimized and validated. The fiber which showed the highest ability for extraction of phthalates was DVB/CAR/PDMS which combines a liquid polymeric coating (polydimethyl siloxane and divinylbenzene) with a carboxen porous sorbent layer. The obtained limit of detection was in the range between 0.3 and 2.6 ng mL-1. Thus, this fiber was used for extraction of phthalates from twelve commercial PET bottled water samples. All investigated water brands showed the presence of two to six phthalates at concentrations between 6.3 and 112.2 ng mL-1. The highest level was observed for DnBP, followed by DEHP, DiBP, DMP, DEP and DiPP.
Keywords: GC-MS/MS; Microextraction; PET bottled water; Phthalates; SPME.
Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.