The fine particles generated by the foundry industry are present in the atmosphere; they have an impact on the climate because of their influence on atmospheric radioactive phenomena. As a result of this scenario, there is a rising amount of legislation restricting the emission of pollutants from foundry industries and related businesses. In response to this situation, many researchers have concentrated on end-of-pipe technologies, one of which is the wet scrubber, which is a device that is primarily used in foundries to control pollution and is one of the devices that has been incorporated. The disadvantage of using this wet scrubber, on the other hand, is that it contributes to secondary pollution when it is used. In order to combat secondary pollution, a model of an enhanced wet scrubber system that incorporates a multi-sand filtering technology was developed. The performance of this redesigned wet scrubber system was evaluated with the use of computational fluid dynamics (CFD) software. In CFD, the Reynolds stress model was applied for simulation. The pressure magnitudes and velocity magnitudes are obtained by this simulation. The volume fraction of the dust was evaluated through the DPM approach. Because of the introduction of the filtration tank's computation, it was discovered that successful filtration was accomplished using sand filters, meaning that environmental chemicals and particles were totally filtered from 0.17 kg at the entrance to zero kg of particles at the outflow.
© 2022. The Author(s).