Biosolids-based activated carbon for enhanced copper removal from citric-acid-rich aqueous media

Abstract

In this study, we employed batch experiments to assess the effects of citric acid on the Cu(II) removal efficiencies of seven biosolids-based adsorbents. The adsorbents used were dried biosolids (BS), biosolids biochar (BSBC), biosolids-based activated carbon (SBAC), nitric-acid-modified BSBC (BSBC-HNO₃) and SBAC (SBAC-HNO₃), and amine-modified BSBC (BSBC-NH₂) and SBAC (SBAC-NH₂). However, with 100 mM citric acid in 1 mM Cu(II) solution, only SBAC showed an increase in Cu(II) removal efficiency (64.0-93.5%). Therefore, we used SBAC for further optimisation of the adsorption process. The kinetics data, optimally described by the pseudo-second-order model, indicated that bulk Cu(II) adsorption occurred within 10 min. The highest Cu(II) removal was at pH 3, with the estimated maximum Cu(II) adsorption capacity of SBAC increasing from 0.14 to 0.30 mmol/g, with 100 mM citric acid present. This result clearly indicated the positive effect of citric acid on Cu(II) adsorption. With citric acid present, the Freundlich model optimally fitted the adsorption isotherm data, suggesting adsorption of Cu(II) in multilayers. Further investigation of Cu(II) adsorption in a sequential setup proved that SBAC could lower the residual Cu(II) in the solution to below the discharge limit (0.05 mM) in 1 h. Overall, the production of activated carbon from BS has been proven an efficient Cu(II) adsorbent for Cu-citric-acid-rich aqueous media as a simulation of real wastewaters/leachates, as well as achieving waste-to-resources goals. This is the first study to identify an adsorbent (SBAC) with increased Cu(II) adsorption capacity in the presence of excess citric acid.

Keywords: Biosolids; Citric acid; Copper; Removal; Wastewater.