The printing variable least addressed in previous research aiming to reveal the effect of the FFF process parameters on the printed PLA part's quality and properties is the filament color. Moreover, the color of the PLA, as well as its manufacturer, are rarely mentioned when the experimental conditions for the printing of the samples are described, although current existing data reveal that their influence on the final characteristics of the print should not be neglected. In order to point out the importance of this influential parameter, a natural and a black-colored PLA filament, produced by the same manufacturer, were selected. The dimensional accuracy, tensile strength, and friction properties of the samples were analyzed and compared for printing temperatures ranging from 200 °C up to 240 °C. The experimental results clearly showed different characteristics depending on the polymer color of samples printed under the same conditions. Therefore, the optimization of the FFF process parameters for the 3D-printing of PLA should always start with the proper selection of the type of the PLA material, regarding both its color and the fabricant.
Keywords: additive manufacturing; dimensional accuracy; filament color; friction performance; fused deposition modeling (FDM); fused filament fabrication (FFF); polylactic acid (PLA); printing temperature; tensile strength; wear.