Paper-based sorptive phases (PSPs) are functional planar materials with a demonstrated potential in analytical sample preparation. This article describes the synthesis of a polyimide coated paper by an in-situ imidization at a high temperature. Polyimides (PI) are synthesized in two subsequent steps where a hydrophilic polymer, in this case, poly(amic acid) (PAA), is formed as an intermediate product. PAA is finally transformed into hydrophobic PI by thermal curing at 180 °C. The synthesis of PI-paper takes advantage of this two-step procedure. In the first stage, a segment of filter paper is immersed into an aqueous PAA solution. After the solvent evaporation, the paper is heated at 180 °C for 1 h inducing the formation of the hydrophobic PI over the cellulose fibers. Infrared spectroscopy has been used to characterize the synthesized materials by defining a coverage factor F. The hydrophobicity of the materials has been studied using an aqueous methylene blue solution as a marker. To fully demonstrate the usefulness of the material in the sample preparation field, the extraction of methadone from oral fluid (OF) samples has been considered as a model analytical problem. The main variables affecting the synthesis (PAA concentration on the precursor solution and number of dips) and the extraction (elution and extraction times) have been fully evaluated. Working under the optimum conditions, a limit of quantification of 9 µg/L, intraday and interday precision better than 14.6%, and accuracy in the range of 87-108% were obtained.
Keywords: In-situ polymerization, Methadone, Oral fluid; Paper-based sorptive phase; Polyimide.
Copyright © 2022 The Author(s). Published by Elsevier B.V. All rights reserved.