Fast-hardening cement can be used to quickly repair concrete constructions. Characterizing mechanical properties by electrical properties is a promising method to evaluate the mechanical performance nondestructively. However, little attention has been paid to this area. In this paper, copper-coated fine-steel-fibers-reinforced reactive powder concrete (RPC) with compound cement was manufactured. The mass ratio of sulphoaluminate and ordinary Portland cement in the compound cement was 1:1. The influence of copper-coated fine steel fibers with the volume increasing from 0 to 3.0% by the total volume of RPC on the working performances (fluidity and setting time), mechanical properties (flexural strength and toughness, drying shrinkage rate and compressive strength) and electrical parameters (AC electrical resistance and AC impedance spectroscopy curves) was investigated. The electron microscope energy spectrum experiment was applied in analyzing the macro properties of RPC. The results exhibited that the increasing volume of steel fibers led to decreasing the fluidity and retarding the setting of RPC. The electrical resistance of RPC decreased in the form of a quartic function with the volume of steel fibers. The steel fibers volume of 1.5% was the percolation threshold value. The specimens cured for 28 days showed higher electrical resistance than the specimens cured for 1 day. The flexural or compressive strength of the specimens satisfied a specific functional relationship with the volume of steel fibers and electrical resistance. The addition of steel fibers led to improving the flexural toughness and decreasing the shrinkage rate. Furthermore, 3.0% steel fibers could improve the flexural toughness by 3.9 times and decrease the shrinkage to 88.3% of the specimens without steel fibers.
Keywords: AC electrical resistance; AC impedance spectrum; compressive strength; flexural strength; flexural toughness; working performances.