Computational Investigation of Two-Dimensional Vanadium Boride Compounds for Na-Ion Batteries

Feng Wei; Shuai Xu; Jingjing Li; Shuyu Yuan; Baonan Jia; Shuli Gao; Gang Liu; Pengfei Lu

doi:10.1021/acsomega.2c00134

Computational Investigation of Two-Dimensional Vanadium Boride Compounds for Na-Ion Batteries

ACS Omega. 2022 Apr 20;7(17):14765-14771. doi: 10.1021/acsomega.2c00134. eCollection 2022 May 3.

Authors

Feng Wei^{1

2}, Shuai Xu¹, Jingjing Li¹, Shuyu Yuan¹, Baonan Jia¹, Shuli Gao³, Gang Liu^{2

4}, Pengfei Lu^{1

2}

Affiliations

¹ State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications, Beijing 100876, China.
² School of Electronic Engineering, Beijing University of Posts and Telecommunications, Beijing 100876, China.
³ School of Science, Xi'an University of Architecture and Technology, Xi'an, Shaanxi 710055, China.
⁴ Beijing Key Laboratory of Space-ground Interconnection and Convergence, Beijing University of Posts and Telecommunications, Beijing 100876, China.

Abstract

Sodium (Na)-ion batteries have received widespread attention due to their low cost and good safety. The possibility of two-dimensional vanadium boride (V₂B₂, MBene) as the anode material for Na-ion batteries is explored by first principles. It is found that V₂B₂ has good dynamic stability, thermodynamic stability, and conductivity. V₂B₂ has a good performance as anode material: it can adsorb nearly 3 layers of Na ions, and the maximum capacity reaches 814 mAhg^-1. It is found that V₂B₂ has a very low Na ion diffusion barrier, about 0.011 eV, which represents the ultrahigh ion diffusion rate of Na ions on the surface of V₂B₂. The average open circuit voltage of V₂B₂ is 0.65 V, and good metallicity is maintained during the entire Na ion adsorption process. The results indicate that two-dimensional V₂B₂ has a low diffusion barrier, low open circuit voltage, and high theoretical capacity and is a potential anode material for Na-ion batteries.