Flexible strain sensors occupying a large part of human body detection and wearable electronics, which have a wide sensing range and high sensitivity, are crucial in fully monitoring human motion signals. This study proposed a strategy to construct flexible strain sensors based on the V-groove/wrinkles hierarchical array. The V-groove array was prepared on a polydimethylsiloxane (PDMS) substrate through mold transfer printing. The gold film was sputtered on the prestretching PDMS substrate, and the V-groove/wrinkles hierarchical array was formed after strain release. Compared with the sensors based on single-scale wrinkle structures and a V-groove array, the fabricated strain sensor with the hierarchical array showed high sensitivity (maximum gauge factor up to 2,557.71) and a wide sensing range (up to 45%). In addition, the dynamic characteristics of the sensor were investigated in detail, indicating that the sensor had a fast response (less than 130 ms), a low detection limit (0.1% strain), and good stability (almost no performance loss after 10,000 cycles). In practical applications, the sensor was used to detect sizable physical motion and weak physiological signals, demonstrating great potential application value in human motion detection. This study could provide new ideas for preparing high-performance flexible strain sensors.
Keywords: V-groove; flexible strain sensor; hierarchical structure; human motion detection; wrinkles.